Can You Put a Backup Camera on a Jeep Wrangler

Can You Put a Backup Camera on a Jeep Wrangler

Yes, you can put a backup camera on a Jeep Wrangler. You will need to purchase a camera and mounting kit specifically for the Jeep Wrangler. Once you have the camera and mounting kit, follow the instructions included with the kit to install the camera.

Can you put a backup camera on a Jeep Wrangler? If you’re looking to enhance safety and convenience, this comprehensive installation guide will provide you with the answers you seek. Follow our step-by-step instructions to learn how to successfully add a backup camera to your Jeep Wrangler.

  • Decide where you want to mount the camera on your Jeep Wrangler
  • Drill a hole in the chosen location big enough to fit the camera’s mounting bracket
  • Affix the camera’s mounting bracket to the hole using screws or bolts
  • Run the power and ground wires from the camera to their respective connection points (usually found near the taillights)
  • Splice into the Jeep’s reverse light wire and connect it to the backup camera’s trigger wire
  • Test that everything is working properly before reinstalling any panels or trim pieces that were removed during installation

Jeep Jk Backup Camera Factory Radio

If your Jeep JK is equipped with the factory radio, then you already have everything you need to add a backup camera! That’s right, there is no need to purchase an aftermarket radio or any other special equipment. All you need is a backup camera and the proper wiring harness, and you’re all set.

The first step is to choose the right backup camera for your Jeep JK. There are many different styles and types available on the market today, so take some time to research your options and find the one that best suits your needs. Once you’ve got your camera picked out, it’s time to install it.

Installing a backup camera on your Jeep JK is actually very easy. The hardest part is running the wiring from the camera to the factory radio. But don’t worry, we’ll walk you through it step by step so even if you’re not a certified mechanic, you can do this job in no time flat!

First, disconnect the negative battery terminal to prevent any shorts while working on your electrical system. Next, remove the trim panel around your factory radio using a trim tool or screwdriver. Be careful not to damage any of the plastic components as you remove this trim panel.

With the trim panel removed, locate the small black connector behind the radio (this is where we will be connecting our new backup camera). Using a wire cutter/stripper tool, carefully strip away enough of the sheathing on both wires so that they can be inserted into this black connector. Then insert each wire into their appropriate slot and use needle nose pliers to crimp them down tight (make sure they are inserted all of way – see photo below).

Where Do You Put the Back Up Camera on a Jeep Wrangler?


How Much Does It Cost to Install a Backup Camera in a Jeep Wrangler?

If you’re looking to add a backup camera to your Jeep Wrangler, you can expect to pay anywhere from $100 to $500 for the parts and installation. The exact cost will depend on the type of camera you choose and whether or not you need to have any other work done to your vehicle in order to install it. The most basic backup cameras will just display what’s behind your vehicle on a small screen mounted inside the cabin.

These systems typically cost between $100 and $200. If you want a more sophisticated system that includes features like night vision or a wider field of view, you’ll likely pay closer to $500. Installation costs will also vary depending on the complexity of the job.

If your Wrangler is already equipped with a rearview mirror that has an integrated display, adding a backup camera might be as simple as plugging it into an existing power source and running a few wires through your interior trim panels. In this case, installation could be as low as $50 or $60. However, if your Wrangler doesn’t have an existing display unit, installing a new one could add several hundred dollars to the total cost of the project.

Overall, adding a backup camera to your Jeep Wrangler is a relatively inexpensive way to improve safety and convenience when backing up or parking. With so many different models and features available, there’s sure to be a system that meets both your needs and budget.

Where Do You Put the Back Up Camera on a Jeep Wrangler?

If you’re looking to add a backup camera to your Jeep Wrangler, there are a few things you’ll need to take into account. First, you’ll need to decide where on the vehicle you want to mount the camera. The most popular location is on the rear bumper, but some people also mount them on the tailgate or even on the license plate frame.

Once you’ve decided where to mount the camera, you’ll need to figure out how you want to power it. Some cameras come with their own battery pack that can be wired into the vehicle’s electrical system, while others will need to be plugged into a cigarette lighter or other power outlet.Finally, you’ll need to connect the camera to your Jeep’s audio system so that you can see and hear what’s going on behind you when backing up.

There are a few different ways to do this, but one of the simplest is to use an adapter that plugs into your Jeep’s factory radio. With this setup, all you’ll need to do is press a button on your radio and the image from your backup camera will appear on-screen.

Can I Add a Backup Camera to My 2017 Jeep Wrangler?

If you’re looking to add a backup camera to your 2017 Jeep Wrangler, there are a few things you’ll need to keep in mind. First, you’ll need to decide if you want a wired or wireless camera. Wired cameras are generally more reliable, but wireless cameras are much easier to install.

If you go with a wired camera, you’ll also need to purchase a separate monitor for your vehicle. Once you’ve decided on the type of camera you want, it’s time to start shopping around. There are a number of different brands and models of backup cameras on the market, so it’s important to do your research before making a purchase.

You’ll want to make sure that the camera you choose is compatible with your Jeep Wrangler and that it offers the features and functions that you’re looking for. When it comes time to install your new backup camera, there are a few things to keep in mind. If you’re not comfortable doing the installation yourself, there are plenty of professional automotive shops that can do it for you.

Otherwise, follow the instructions that come with your camera carefully and be sure to test the system thoroughly before hitting the road.

What Year Did Wrangler Get Backup Camera?

If you’re looking for a backup camera for your Wrangler, you’re in luck. Wrangler models from 2007 onward are equipped with factory-installed rearview cameras. That means that no matter what year your Wrangler is, you can get the benefits of a backup camera by installing one yourself.

Wrangler backup cameras offer a number of advantages. First and foremost, they give you a clear view of what’s behind you when you’re backing up. That can be invaluable when trying to avoid obstacles or other vehicles.

Additionally, many backup cameras also offer features like object detection and distance guidelines, which can further help you avoid accidents. There are a few things to keep in mind if you’re thinking about installing a backup camera on your Wrangler. First, make sure that your vehicle is compatible with the camera system you’re considering.

Second, be aware that while most Wranglers come equipped with factory-installed rearview cameras, not all do. If yours doesn’t have one already installed, you’ll need to factor in the cost of installation when making your decision. Finally, consider whether or not you want additional features like object detection and distance guidelines before making your purchase – remember that these features will add to the overall cost of the system.

2007 – 2017 Jeep Wrangler Backup Camera Install


You can absolutely put a backup camera on your Jeep Wrangler! There are plenty of aftermarket options available to choose from, so you can find one that fits both your budget and your needs. Many of the newer models even come with Wi-Fi capabilities, so you can view your camera feed right on your phone or tablet.

No matter which route you go, installing a backup camera on your Jeep Wrangler is a great way to increase safety and peace of mind while backing up and parking.

Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Scroll to Top