How to Reset Pioneer Car Stereo Bluetooth

To reset your Pioneer car stereo’s Bluetooth, first make sure that your phone is paired with the device. Next, go into the settings menu on your stereo and find the “Bluetooth” section. From here, you should be able to select “Forget Device” or “Unpair”.

This will remove the Bluetooth connection between your phone and the Pioneer stereo. If you want to completely disable Bluetooth on your Pioneer stereo, you can also select the “Off” option in the Bluetooth menu.

  • Turn on your Pioneer car stereo and enter Bluetooth mode
  • Select the “Settings” icon on your Pioneer car stereo’s display
  • Scroll down to the “Bluetooth” section and select the “Pairing” option
  • Select the “Delete All Pairings” option and confirm your selection
  • Exit out of the settings menu and enjoy your reset Pioneer car stereo Bluetooth!
How to Reset Pioneer Car Stereo Bluetooth



How Do I Reset My Pioneer Bluetooth Touchscreen?

If you’re looking to reset your Pioneer Bluetooth touchscreen, there are a few things you’ll need to do. First, you’ll need to turn off the power to the unit. Next, press and hold the “Reset” button for about 10 seconds.

Once the unit has been reset, you can then turn it back on and begin pairing it with your devices again. If you’re still having trouble connecting, make sure that your devices are compatible with the Pioneer unit and that they’re within range of each other.

How Do I Reset My Pioneer Divx Bluetooth?

If you’re having trouble resetting your Pioneer Divx Bluetooth, don’t worry – we’ve got you covered. In this blog post, we’ll walk you through the steps necessary to reset your device and get it working properly again.First, make sure that your Pioneer Divx Bluetooth is turned on and in range of your computer or other devices.

If it’s not, turn it on and try again. Once it’s on and in range, open the Settings menu by tapping the icon in the top-right corner of the screen. Next, tap “Bluetooth” to open the Bluetooth settings menu.

Once you’re in the Bluetooth settings menu, tap the button next to “Pair new device.” This will put your Pioneer Divx into pairing mode so that you can connect it to another device. On your computer or other devices that you want to connect to, find and select “Pioneer Divx” from the list of available bluetooth devices.

Once it’s selected, enter the passcode “0000” when prompted (this is just a default code – if you’ve changed yours, use that code instead). After entering the passcode, your devices should be paired and ready to use!If you’re still having trouble resetting your Pioneer Divx Bluetooth after following these steps, contact customer support for help.

How Do I Reset My Bluetooth Car Stereo?

If your Bluetooth car stereo is not working properly, you may need to reset it. Here’s how to do it:

1. Turn off your car stereo and disconnect the power source.

2. Remove the faceplate of your car stereo (if applicable).

3. Locate the reset button on your car stereo. It is usually located in a small hole near the edge of the unit.

4. Use a paperclip or other small object to press and hold the reset button for about 5 seconds.

5. Reconnect the power source to your car stereo and turn it on again.

How Do I Clear My Pioneer Bluetooth Memory?

If you’re looking to clear your Pioneer Bluetooth memory, here’s a quick and easy guide on how to do it. First, open up the Pioneer head unit’s menu and navigate to the Bluetooth settings. Once you’re in the Bluetooth settings, select the “Pairing” option.

Next, delete all of the existing paired devices by selecting each one and pressing the “Delete” button. Finally, press the “Back” button to exit out of the Bluetooth settings menu. That’s all there is to it!

Your Pioneer head unit’s Bluetooth memory will now be cleared and you can start fresh with pairing new devices.

FASTEST INSTRUCTIONS! Pioneer factory reset reset language or Bluetooth DEH-X7800DAB´┐╝ car radio

How to Reset Pioneer Car Stereo Touch Screen

If your Pioneer car stereo touch screen is not responding to input, or if you are having other issues with it, you may need to reset the unit. Here’s how:

1. First, unplug the stereo from its power source and then remove any faceplates or trim pieces that may be obscuring the touchscreen.

2. Next, locate the reset button on the back of the stereo. It is usually small and recessed, so you may need a paper clip or similar object to press it.

3. Once you have found the reset button, press and hold it for about five seconds. After that time has elapsed, release the button and then wait for the stereo to restart itself.

4. Finally, once the reboot process is complete, reattach any faceplates or trim pieces and plug the stereo back in to its power source. Your Pioneer car stereo touch screen should now be working properly again!


If your Pioneer car stereo is not connecting to Bluetooth, there are a few things you can try to reset the connection. First, delete the pairing on both the phone and the stereo. Then, turn off both devices and restart them.

If that doesn’t work, try forgetting the device on your phone and then reconnecting it. You may also need to update the software on your Pioneer car stereo.

Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Scroll to Top