How to Convert Double Din to Single Din

If you want to convert a double DIN car stereo to a single DIN, you’ll need to purchase a special mounting kit and dash adapter. The process is fairly straightforward, but will require some basic knowledge of car stereo installation. First, remove the old double DIN unit from the dash and disconnect all wiring.

Next, install the new single DIN unit into the mounting kit, which will likely involve some drilling. Then, connect all wiring to the new head unit and test it out. Finally, reinstall any trim pieces that were removed during the installation process.

  • Decide which single DIN you want to convert to
  • Purchase the correct size mounting kit for your car
  • Unscrew the old, double DIN head unit from the dash and disconnect all of the wires
  • Attach the new, single DIN head unit to the provided cage and screw it into place
  • Connect all of the wires to their appropriate locations on the back of the new head unit
  • Turn on your car’s ignition and test out your new stereo!


Can I Replace a Double Din With a Single Din?

If you’re looking to upgrade your car stereo, you might be wondering if you can replace a double DIN head unit with a single DIN. The answer is yes, but it’s not as simple as just swapping out the head units. You’ll also need to purchase an adapter kit that will allow you to mount the new head unit in your dash.

The most important thing to keep in mind when replacing a double DIN head unit with a single DIN is that you’ll lose some functionality. Most double DIN units are touchscreen and offer more advanced features like navigation and smartphone integration. If these features are important to you, then you might want to reconsider replacing your double DIN unit with a single DIN.

That said, there are still plenty of reasons why you might want to replace a double DIN head unit with a single DIN. Maybe you’re not interested in all the bells and whistles offered by newer double DIN models and prefer the simplicity of a single DIN Solution. Or maybe you’ve had trouble finding a replacement double DIN Dash kit for your car.

Whatever the reason, if you decide to go ahead with the swap, just make sure you get an adapter kit so that everything fits properly in your dash.

How Do I Install a Single Din Stereo in a Double Din?

Installing a single DIN stereo in a double DIN space may seem like a daunting task, but it is actually quite simple. The first thing you need to do is remove the old stereo. This can be done by removing the four screws that hold it in place, and then disconnecting the wiring harnesses from the back of the unit.

Next, take your new single DIN stereo and connect the wiring harnesses to it. Once everything is connected, screw the new unit into place using the four screws you removed from the old one. Finally, reattach any trim pieces that were removed during installation and you’re all set!

Is Single Din Better Than Double Din?

There is no simple answer to this question as it depends on a variety of factors. In general, single DIN car stereos are less expensive than double DIN models and offer fewer features. However, they are typically easier to install and take up less space in the dash.

Double DIN car stereos usually offer more advanced features such as built-in navigation, touchscreens, and higher-quality sound. They can also be more difficult to install, so it’s important to consider all the factors before making a decision.

What Do I Need to Install a Single Din Radio?

If you’re looking to install a single DIN radio in your car, there are a few things you’ll need to make sure you have on hand. First, you’ll need a screwdriver and some wire cutters. You’ll also need a drill and some screws (to secure the radio in place).

Finally, you’ll need a wiring harness that’s compatible with your car. Most radios come with a standard wiring harness, but it’s always best to check before you start drilling holes!

Install Double Din Head Unit In Single Din Spot Holden Jackaroo JVC KW-AVX746

Double Din Conversion Kit

If you own a car with a single DIN factory radio, you may be looking for a way to upgrade to a double DIN unit. There are various reasons why you might want to do this, such as wanting a larger screen or needing more functionality. Whatever your reasons, there is a double DIN conversion kit available that can make the process relatively easy.

The first step is to purchase the kit, which can be found online or at some electronics stores. Once you have the kit, you will need to remove the old radio from your dash. This is usually pretty easy, as there are only a few screws holding it in place.

With the old radio out, you will then need to install the new one using the brackets and wiring harness that come with the kit.The hardest part of the entire process is probably running the new wires through your dash. This can be tricky, as there are often tight spaces and difficult angles involved.

However, if you take your time and follow directions carefully, it should all go smoothly. Once everything is wired up correctly, you should be able to enjoy your new double DIN head unit!


In conclusion, the process of converting a Double Din to Single Din opens up a realm of possibilities for optimizing your car’s dashboard space and upgrading its functionality. By following the comprehensive steps outlined in this guide, you can confidently embark on this transformational journey. Remember, whether you’re aiming to enhance your audio system, integrate new technology, or simply achieve a sleeker dashboard layout, this conversion offers a personalized solution tailored to your preferences. Stay informed, gather the necessary tools, and take your time during the conversion process to ensure a seamless and successful outcome. With these insights at your disposal, you’re now equipped to embark on your Single Din conversion project while enjoying a more streamlined and functional driving experience.

Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Scroll to Top