How to Remove Backup Camera on 2019 Jeep Wrangler

How to Easily Remove the Backup Camera on Your 2019 Jeep Wrangler

To remove the backup camera on a 2019 Jeep Wrangler, follow these steps:First, disconnect the negative terminal of the vehicle’s battery. Then, locate the camera wiring harness and unplug it from the vehicle’s main wiring.

Finally, remove any mounting screws or clips securing the camera in place and carefully detach the camera from its mounting bracket.

How to Easily Remove the Backup Camera on Your 2019 Jeep Wrangler


Overview Of Removing Backup Camera On Your 2019 Jeep Wrangler

Removing the backup camera on your 2019 Jeep Wrangler is a simple process that you should not overlook. The importance of removing the backup camera lies in its usefulness during off-road adventures. To remove it, follow this step-by-step guide. First, locate the camera on the rear of your Jeep.

Next, disconnect the camera’s wiring harness carefully. Then, unscrew the camera from its mount using a screwdriver. After removing the camera, you can choose to reattach the mount or leave it off altogether. Keep in mind that removing the backup camera may affect some features of your Jeep, such as parking assistance systems.

Always double-check the manufacturer’s instructions and consult with a professional if you have any concerns. Overall, removing the backup camera is a straightforward process that allows you to customize your Jeep to your liking.

Tools Needed For Removing Backup Camera

Removing the backup camera on a 2019 Jeep Wrangler requires a few essential tools. First, a trim panel removal tool is needed to safely detach the camera housing from the vehicle’s body. This tool helps avoid any potential damage to the surrounding surfaces.

Additionally, a Torx screwdriver is necessary to remove the screws securing the camera in place. The Torx size may vary depending on the specific model of the Jeep Wrangler. Lastly, a wire harness disconnect tool is required to safely disconnect the camera’s wiring from the vehicle’s electrical system.

This tool prevents any accidental damage to the wiring or connectors. By using these tools properly, the backup camera can be easily and safely removed from the 2019 Jeep Wrangler.

Steps To Easily Remove The Backup Camera

Disconnect the vehicle’s battery before starting. Remove the interior trim panels carefully. Disconnect the camera harness. Next, remove the camera housing. Finally, take out the camera from the housing. Follow these steps to remove the backup camera on your 2019 Jeep Wrangler easily.

Quick Tips For A Smooth Removal Process

Taking precautions is crucial when removing the backup camera on a 2019 Jeep Wrangler. This ensures that neither the camera nor the vehicle gets damaged during the process. Seek professional assistance if needed to make the removal process smoother and error-free.

By doing so, you can avoid any costly mistakes and potential complications that may arise from attempting to remove the camera yourself. It is important to carefully follow these tips to ensure a successful removal without causing any harm to the camera or the vehicle.

Keep these recommendations in mind when removing the backup camera on your 2019 Jeep Wrangler.

Safety Precautions To Consider

Safety precautions should always be considered when removing a backup camera on a 2019 Jeep Wrangler. First, it is important to wear protective gloves and goggles to prevent any injuries. Secondly, ensure that proper support is provided for the camera during the removal process.

This will help prevent any accidental damage to the camera or surrounding components. Taking these precautions will not only ensure your safety but also protect the integrity of the camera and your Jeep Wrangler. Always prioritize safety when working on your vehicle to avoid any mishaps or accidents.

Troubleshooting Common Challenges

Removing the backup camera on a 2019 Jeep Wrangler can sometimes pose challenges. The first challenge is the difficulty of removing the trim panels. These panels can be stubborn and may require some extra effort. However, with the right tools and patience, they can be successfully taken off.

The second challenge is identifying the correct harness to disconnect. In some cases, there may be multiple harnesses connected to the camera, and it’s important to disconnect the correct one to avoid causing any damage. Carefully inspect the wiring and look for any markings or labels that indicate the correct harness.

By troubleshooting these common challenges, you can remove the backup camera from your 2019 Jeep Wrangler efficiently and safely.

Frequently Asked Questions For How To Remove Backup Camera On 2019 Jeep Wrangler

Where Is Jeep Wrangler Backup Camera Located?

The backup camera in the Jeep Wrangler is located on the rear of the vehicle.

How Do You Remove The Rear-View Mirror On A Jeep Wrangler Jl?

To remove the rear-view mirror on a Jeep Wrangler JL, follow these steps:1. Use a flathead screwdriver to carefully pry off the plastic cover above the mirror. 2. Unscrew the bolt that holds the mirror in place using a wrench or pliers.

3. Gently pull the mirror assembly away from the windshield. 4. Disconnect the electrical connector if your Jeep is equipped with a power-adjustable mirror. 5. Lift the mirror off the mounting bracket and set it aside.

Why Is My Jeep Backup Camera Not Working?

Your Jeep backup camera may not be working due to a malfunction in the camera itself or a wiring issue in the vehicle.

How Much Does It Cost To Put In A Back Up Camera On A Jeep Wrangler?

The cost of installing a backup camera on a Jeep Wrangler varies, so it’s best to contact a professional for an accurate quote.


Removing the backup camera on a 2019 Jeep Wrangler is a task that can be done with the right knowledge and tools. By following the step-by-step guide provided in this blog post, you can easily remove the backup camera without any hassle.

Remember to disconnect the battery before starting the process and handle the camera with care to avoid any damage. Once successfully removed, you can either replace it with a new one or proceed with any modifications you have planned for your Jeep Wrangler.

Whether you’re looking to add new accessories or make other modifications, removing the backup camera is an important first step. With this guide, you can confidently tackle the removal process and continue customizing your 2019 Jeep Wrangler to fit your unique style and preferences.

So go ahead and start your journey towards a more personalized Jeep Wrangler experience.

Scroll to Top